添加了半成品的浇水部分，没有实际作用，目前浇水功能直接用硬件实现；

加入了对毕设论文的记录；

plan_manage_main/ewp/settings/plan_manage_main.Debug.cspy.bat

@@ -1,24 +1,24 @@
-@REM This batch file has been generated by the IAR Embedded Workbench
-@REM C-SPY Debugger, as an aid to preparing a command line for running
-@REM the cspybat command line utility using the appropriate settings.
-@REM
-@REM Note that this file is generated every time a new debug session
-@REM is initialized, so you may want to move or rename the file before
-@REM making changes.
-@REM
-@REM You can launch cspybat by typing the name of this batch file followed
-@REM by the name of the debug file (usually an ELF/DWARF or UBROF file).
-@REM
-@REM Read about available command line parameters in the C-SPY Debugging
-@REM Guide. Hints about additional command line parameters that may be
-@REM useful in specific cases:
-@REM   --download_only   Downloads a code image without starting a debug
-@REM                     session afterwards.
-@REM   --silent          Omits the sign-on message.
-@REM   --timeout         Limits the maximum allowed execution time.
-@REM 
-
-
-"D:\work_soft\iar\arm\common\bin\cspybat" "D:\work_soft\iar\arm\arm\bin\armproc.dll" "D:\work_soft\iar\arm\arm\bin\armjlink.dll"  %1 --plugin "D:\work_soft\iar\arm\arm\bin\armbat.dll" --device_macro "D:\work_soft\iar\arm\arm\config\debugger\Freescale\Kinetis.dmac" --backend -B "--endian=little" "--cpu=Cortex-M0+" "--fpu=None" "-p" "D:\work_soft\iar\arm\arm\CONFIG\debugger\Freescale\MKL25Z128xxx4.ddf" "--semihosting" "--device=MKL25Z128xxx4" "--drv_mtb_regbase=0xF0000000" "--drv_mtb_dwtregbase=0xF0001000" "--drv_mtb_minramaddr=0x20000000" "--drv_mtb_maxramaddr=0x20002FFF" "--drv_communication=USB0" "--jlink_speed=auto" "--jlink_initial_speed=1000" "--jlink_reset_strategy=0,0" "--jlink_interface=SWD" "--drv_catch_exceptions=0x000" "--drv_swo_clock_setup=72000000,0,2000000" 
-
-
+@REM This batch file has been generated by the IAR Embedded Workbench
+@REM C-SPY Debugger, as an aid to preparing a command line for running
+@REM the cspybat command line utility using the appropriate settings.
+@REM
+@REM Note that this file is generated every time a new debug session
+@REM is initialized, so you may want to move or rename the file before
+@REM making changes.
+@REM
+@REM You can launch cspybat by typing the name of this batch file followed
+@REM by the name of the debug file (usually an ELF/DWARF or UBROF file).
+@REM
+@REM Read about available command line parameters in the C-SPY Debugging
+@REM Guide. Hints about additional command line parameters that may be
+@REM useful in specific cases:
+@REM   --download_only   Downloads a code image without starting a debug
+@REM                     session afterwards.
+@REM   --silent          Omits the sign-on message.
+@REM   --timeout         Limits the maximum allowed execution time.
+@REM 
+
+
+"D:\work_soft\iar\arm\common\bin\cspybat" "D:\work_soft\iar\arm\arm\bin\armproc.dll" "D:\work_soft\iar\arm\arm\bin\armjlink.dll"  %1 --plugin "D:\work_soft\iar\arm\arm\bin\armbat.dll" --device_macro "D:\work_soft\iar\arm\arm\config\debugger\Freescale\Kinetis.dmac" --backend -B "--endian=little" "--cpu=Cortex-M0+" "--fpu=None" "-p" "D:\work_soft\iar\arm\arm\CONFIG\debugger\Freescale\MKL25Z128xxx4.ddf" "--semihosting" "--device=MKL25Z128xxx4" "--drv_mtb_regbase=0xF0000000" "--drv_mtb_dwtregbase=0xF0001000" "--drv_mtb_minramaddr=0x20000000" "--drv_mtb_maxramaddr=0x20002FFF" "--drv_communication=USB0" "--jlink_speed=auto" "--jlink_initial_speed=1000" "--jlink_reset_strategy=0,0" "--jlink_interface=SWD" "--drv_catch_exceptions=0x000" "--drv_swo_clock_setup=72000000,0,2000000" 
+
+

plan_manage_main/ewp/settings/plan_manage_main.crun

@@ -1,16 +1,16 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<crun>
-  <version>1</version>
-  <filter_entries>
-    <filter index="0" type="default">
-      <type>*</type>
-      <start_file>*</start_file>
-      <end_file>*</end_file>
-      <action_debugger>0</action_debugger>
-      <action_log>1</action_log>
-    </filter>
-  </filter_entries>
-</crun>
-
-
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<crun>
+  <version>1</version>
+  <filter_entries>
+    <filter index="0" type="default">
+      <type>*</type>
+      <start_file>*</start_file>
+      <end_file>*</end_file>
+      <action_debugger>0</action_debugger>
+      <action_log>1</action_log>
+    </filter>
+  </filter_entries>
+</crun>
+
+

plan_manage_main/ewp/settings/plan_manage_main.dni

@@ -1,127 +1,118 @@
-[Stack]
-FillEnabled=0
-OverflowWarningsEnabled=1
-WarningThreshold=90
-SpWarningsEnabled=1
-WarnLogOnly=1
-UseTrigger=1
-TriggerName=main
-LimitSize=0
-ByteLimit=50
-[DebugChecksum]
-Checksum=-253352013
-[CodeCoverage]
-Enabled=_ 0
-[Exceptions]
-StopOnUncaught=_ 0
-StopOnThrow=_ 0
-[CallStack]
-ShowArgs=0
-[Disassembly]
-MixedMode=1
-[Interrupts]
-Enabled=1
-[MemConfig]
-Base=1
-Manual=0
-Ddf=1
-TypeViol=0
-Stop=1
-[Simulator]
-Freq=10000000
-MultiCoreRunAll=1
-[JLinkDriver]
-CStepIntDis=_ 0
-TraceBufferSize=0x00010000
-TraceStallIfFIFOFull=0x00000000
-TracePortSize=0x00000004
-[SWOTraceHWSettings]
-OverrideDefaultClocks=0
-CpuClock=72000000
-ClockAutoDetect=0
-ClockWanted=2000000
-JtagSpeed=2000000
-Prescaler=36
-TimeStampPrescIndex=0
-TimeStampPrescData=0
-PcSampCYCTAP=1
-PcSampPOSTCNT=15
-PcSampIndex=0
-DataLogMode=0
-ITMportsEnable=0
-ITMportsTermIO=0
-ITMportsLogFile=0
-ITMlogFile=$PROJ_DIR$\ITM.log
-[Trace1]
-Enabled=0
-ShowSource=1
-[Trace2]
-Enabled=0
-ShowSource=0
-[SWOTraceWindow]
-PcSampling=0
-InterruptLogs=0
-ForcedTimeStamps=0
-EventCPI=0
-EventEXC=0
-EventFOLD=0
-EventLSU=0
-EventSLEEP=0
-[PowerLog]
-LogEnabled=0
-GraphEnabled=0
-ShowTimeLog=1
-ShowTimeSum=0
-Title_0=I0
-Symbol_0=0 4 1
-LiveEnabled=0
-LiveFile=PowerLogLive.log
-[DataLog]
-LogEnabled=0
-SumEnabled=0
-GraphEnabled=0
-ShowTimeLog=1
-ShowTimeSum=1
-[EventLog]
-LogEnabled=0
-SumEnabled=0
-GraphEnabled=0
-ShowTimeLog=1
-ShowTimeSum=1
-SumSortOrder=0
-[InterruptLog]
-LogEnabled=0
-SumEnabled=0
-GraphEnabled=0
-ShowTimeLog=1
-ShowTimeSum=1
-SumSortOrder=0
-[Disassemble mode]
-mode=0
-[Breakpoints2]
-Bp0=_ 1 "EMUL_CODE" "{$PROJ_DIR$\..\src\app\tft.c}.728.13" 0 0 1 "" 0 "" 0
-Bp1=_ 1 "EMUL_CODE" "{$PROJ_DIR$\..\src\app\plan_handle.c}.213.5" 0 0 1 "" 0 "" 0
-Bp2=_ 1 "EMUL_CODE" "{$PROJ_DIR$\..\src\app\tft.c}.999.9" 0 0 1 "" 0 "" 0
-Count=3
-[Log file]
-LoggingEnabled=_ 0
-LogFile=_ ""
-Category=_ 0
-[TermIOLog]
-LoggingEnabled=_ 0
-LogFile=_ ""
-[Aliases]
-Count=0
-SuppressDialog=0
-[CallStackLog]
-Enabled=0
-[PowerProbe]
-Frequency=10000
-Probe0=I0
-ProbeSetup0=2 1 1 2 0 0
-[DriverProfiling]
-Enabled=0
-Mode=1
-Graph=0
-Symbiont=0
-Exclusions=
+[Stack]
+FillEnabled=0
+OverflowWarningsEnabled=1
+WarningThreshold=90
+SpWarningsEnabled=1
+WarnLogOnly=1
+UseTrigger=1
+TriggerName=main
+LimitSize=0
+ByteLimit=50
+[DebugChecksum]
+Checksum=231404021
+[CodeCoverage]
+Enabled=_ 0
+[Exceptions]
+StopOnUncaught=_ 0
+StopOnThrow=_ 0
+[CallStack]
+ShowArgs=0
+[Disassembly]
+MixedMode=1
+[Interrupts]
+Enabled=1
+[MemConfig]
+Base=1
+Manual=0
+Ddf=1
+TypeViol=0
+Stop=1
+[Simulator]
+Freq=10000000
+MultiCoreRunAll=1
+[JLinkDriver]
+CStepIntDis=_ 0
+TraceBufferSize=0x00010000
+TraceStallIfFIFOFull=0x00000000
+TracePortSize=0x00000004
+[SWOTraceHWSettings]
+OverrideDefaultClocks=0
+CpuClock=72000000
+ClockAutoDetect=0
+ClockWanted=2000000
+JtagSpeed=2000000
+Prescaler=36
+TimeStampPrescIndex=0
+TimeStampPrescData=0
+PcSampCYCTAP=1
+PcSampPOSTCNT=15
+PcSampIndex=0
+DataLogMode=0
+ITMportsEnable=0
+ITMportsTermIO=0
+ITMportsLogFile=0
+ITMlogFile=$PROJ_DIR$\ITM.log
+[SWOTraceWindow]
+PcSampling=0
+InterruptLogs=0
+ForcedTimeStamps=0
+EventCPI=0
+EventEXC=0
+EventFOLD=0
+EventLSU=0
+EventSLEEP=0
+[PowerLog]
+LogEnabled=0
+GraphEnabled=0
+ShowTimeLog=1
+ShowTimeSum=0
+Title_0=I0
+Symbol_0=0 4 1
+LiveEnabled=0
+LiveFile=PowerLogLive.log
+[DataLog]
+LogEnabled=0
+SumEnabled=0
+GraphEnabled=0
+ShowTimeLog=1
+ShowTimeSum=1
+[EventLog]
+LogEnabled=0
+SumEnabled=0
+GraphEnabled=0
+ShowTimeLog=1
+ShowTimeSum=1
+SumSortOrder=0
+[InterruptLog]
+LogEnabled=0
+SumEnabled=0
+GraphEnabled=0
+ShowTimeLog=1
+ShowTimeSum=1
+SumSortOrder=0
+[Log file]
+LoggingEnabled=_ 0
+LogFile=_ ""
+Category=_ 0
+[TermIOLog]
+LoggingEnabled=_ 0
+LogFile=_ ""
+[CallStackLog]
+Enabled=0
+[PowerProbe]
+Frequency=10000
+Probe0=I0
+ProbeSetup0=2 1 1 2 0 0
+[DriverProfiling]
+Enabled=0
+Mode=1
+Graph=0
+Symbiont=0
+Exclusions=
+[Disassemble mode]
+mode=0
+[Breakpoints2]
+Count=0
+[Aliases]
+Count=0
+SuppressDialog=0